Hydraulic drive head T-11000

Description

The hydraulic driver head is designed to convert hydraulic energy into rotational motion. The special device of this hydraulic head allows you to create a very high torque with its small dimensions. There are several designs, depending on what kind of torque and what speed is required. When the torque is high, the rotation speed is small, and when the torque is lower, the rotation speed is higher.

Hydraulic drive head specifications

Rated torque = 11000 Nm
Speed (nominal) = 12.5 rpm
Speed (max) = 19 rpm
Speed (min) = 3 rpm
Inlet pressure (nominal) = 16 MPa
Inlet pressure (maximum) = 20 MPa
Weight (without holding bracket) = 46 kg
Total weight = 78 kg
The temperature range of the oil = from + 15 ° С to + 60 ° С
Interval of ambient temperatures = from -40 ° С to + 40 ° С

Standard equipment set consists of:

1. Hydraulic driver T-11000 – 1 pc.,
2. Holder – 2pc.,
3. Spline shaft with flange – 1pc.,
4. Torque bar – 1 pc.,
5. High-pressure hoses (L=0,5m) with quick couplers – 2pc.

The high-torque low-speed hydraulic motor allows safely and efficiently installation screw piles on objects of any degree of complexity. The hydraulic head can be used as part of a device for the installation of screw piles, and for other purposes.